托驰（上海）工业传感器有限公司
托驰（上海）工业传感器有限公司
☰
|
|
韓國Dacell儀錶DN30w & MP-981
价格
电议
服务
 资质已审查
|
产品介绍 |
| 韓國Dacell儀錶DN30w & MP-981 RPM processor/tachometer (frequency input).
The setup sequence is simple and quick using four
push buttons only.
?Relay output(Hi Low)
?4 Relay output
?Peak & sample hold
?Analog out (DAC)
?Watch dog
?Calibration by Pulse/circle input
Option :
?OP-0 : 4~20mA
?OP-02 : RS232C serial interface
?OP-03 : RS485 Multi drop interface | | 
 | | | | | Specifications | Accuracy | | Application sensor | Proximity sensor (MP981) Rotary Encorder | | Sensor authorized voltage | DC 12V | Measuring range
Measuring Accuracy | Input frequency 5kHz max 1 ~ 350 pulse/circle
0.05% | | Display | 0 ~ 99999 | | Character height | 7 segment LED 14mm | | Voltage output | DC 0 ~ 10V (Option 4~20mA) | | Contact capacity | AC 125V 0.5A DC 24V 1A | | Relay life time | more than 5000000 times | | Usage temperature range | -10℃ ~ 60℃ | | Humidity | less than 80% RH (no dew condensation) | | Power source used | AC 220V 50/60Hz | | Dimensions | 96 × 48 × 128mm | | Cutting size | 91.5 × 44.5mm | | Weight | About 800 g | | | | |  | | | | MP-981 | | | | Specifications | Accuracy | | Detection method | Hall element | | Measurement range | 1?~20?(using a 60P/R gear 1~20000r/min
with an output waveform duty cycle 50%±20%) | | Detection gear | Strong magnetic materials | | Gap between detector and gear | (modulus 0.5??3 tooth width 3 mm or greater) | | Power supply used | DC 12V±2V(0.5Vp-p or less ripple) | | Current consumption | 40mA or less(12V at 25℃) | | Output waveform | Lew level;±0.5V rectangular waveform(With no loac) | | Output impedance | Approx. 330? | | Output type | Floating groung | | Protective circuit | Power supply polarity and output short protection | | Operating temperature range | -10~+70℃ | | Storage temperature range | -20~+80℃ | | Matching connector | 6-pin connector (type R04-PB6F plug) | | Allowable vibration | double-ended 1.2mm at 30? in X Y and Z direction | | (during-operation) | for one hour each. | | Allowable shock (non-operating) | 490? in Xand Y direction each 3 times | | Withstand voltage | 1. DC250V 1min. (between shield and signal cable)
2. DC250V 1min. (between shield and sensor head) | | Interface indicator | DN-30 | | Weight | Approx. 80g (including two mounting nuts) | | Accessories | Mounting nuts(2) | | | | |  | |
详细资料 |
|
