托驰（上海）工业传感器有限公司
托驰（上海）工业传感器有限公司
☰
|
|
韓國DacelI仪表|放大器DN-AM1000
价格
电议
服务
 资质已审查
|
产品介绍 |
| | | | Specifications | Accuracy | | EXCITATION | 5 steps : 1V 2V 5V 7.5V 10V
Current : 170mA max.
Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
Noise and ripple : 0.05% p-p max (dc 10kHz)
Stability : ± 0.02%/℃ | | INPUT | STRAIN GAUGE :
quarter half or full bridge (50~1000Ω)
Built-in 120Ω and 350Ω dummy resister
TRANSDUCER :
Piezoresistive strain gauge typespotentiometerDCDT transducers displacement. | | AMPLIFIER | 1st Gain : ×1 ×10 ×100 ×400 ×1000 5steps (accuracy ±1%)
2nd Gain : ×1~×11 continuously variable
Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
Fine Adjust
Frequence response : 100kHz (-3dB) max
Input resistance : 1GΩ differential or common mode
Input capacitance : 4pF differential or common mode
Input voltage range :
± 10V differential mode
12V-(G/2× Vd) common mode (Vd = actual differential input voltage)
Bias current : ± 30nA typical each input
Common-mode rejection (G=100) : 100dB min dc to 60Hz with 1kΩ source imbalance
Stability (G<1000) : 5ppm/℃ max
Noise (G=100) : 0.01~10Hz 0.3μVp-p R.T.I | | FILTER | Characteristic : low-pass active 2-pole Butterworth standard
Frequencies (-3dB) : 10Hz 100Hz 1kHz 10kHz wide-band | AMPLIFIER OUTPUT
(BNC CONNECTOR) | Output 1 : ±10V @100mA max
Output 2 ; ±10V @10mA max
Linearity : ±0.01% | | VOLTAGE DISPLAY | Display character : 7-segment 4-digits LED
Display range : 0.000V ~ ± 10.00V | | GAIN | 5 steps Amplilfier (x1 x10 x100 x400 x1000) | | FREQUENCY RESPONSE | 100kHz (-3dB) Max | | BRIDGE BALANCE | Auto ranging : ± 4000με (2mV/V)
Auto balance time : 1 second typical
Manual balance range : ± 1V
Storage : non-volatile data memory (EEPROM) | | LOW PASS FILTER | 4 steps 10Hz 100Hz 1kHz 10kHz (-3dB) | | LINEARITY | ±0.01% | | STABILITY | ±0.01%℃ | | SHUNT CALIBRATION | Bridge resistance 120Ω : 200με and 2000με calibrations
Bridge resistance 350Ω : 200με and 2000με calibrations | | INPUT IMPEDANCE | more than 1GΩ | | POWER | AC 110V or 220V (switch selected) 50/60Hz 7.5watts | | 3-wirecode ( 2-wire : power / 1-wire : Ground) | | | | |  | |
详细资料 |
|
