展开
托驰（上海）工业传感器有限公司
托驰（上海）工业传感器有限公司 ☰
当前位置： 首页>> 产品展示 >> 进口气体传感器 >>OS-6 Ozone Controller Data Sheet臭氧检测仪

OS-6 Ozone Controller Data Sheet臭氧检测仪

价格 电议
更新时间
2019-02-08 05:50:03
起订量
1件起批
服务
 资质已审查
发货地
上海市 嘉定区
货期
近期热度
次浏览
立即询报价

产品介绍

OS-6 Ozone Controller Data Sheet

Industrial Grade Ozone Controller and Monitor

The OS-6 is an industrial grade ozone controller and monitor. The OS-6 design has been optimized for accuracy ease of installation setup and operation.

Features:

  • Industrial strength water resistant enclosure.
  • Large digital display auto-ranging (2-20ppm) w/ backlight.
  • Easy front panel access to set points and relays.
  • Precisely adjustable max min and fail time set points.
  • Failure alarm if ozone remains outside control range.
  • Front panel generator control cutoff switch for easy maintenance.
  • User selectable PPM ranges for analog output (4-20 mA and 0-2 VDC)
  • OSHA 0.1 ppm safety limit light.

 

Specifications:

  • Enclosure: Wall mounted polycarbonate enclosure resists water spray and splash (NEMA 4X).
  • Size:  H = 6.3”/160mm W = 6.5”/166mm D = 4.6”/118mm.
  • Power in:  12-24 VDC.
  • Power out:  +5 or +12-24 VDC to sensor.
  • Data in:  RS-232 serial data from remote sensor module (SM-4 or equivalent).
  • Data out:  RS-232 9600 Baud 8N1 format.
  • Analog out:  0-2 V and 4-20 mA internal jumpers select full scale PPM range.
  • Control in:  Generator enable (contact closure).
  • Control outputs:  Relays 10A @ 25VDC 0.25A @ 250VDC 2.0 KVA AC (resistor).
  • Relay functions:  Ozone generator control >100 PPB safety limit failure to control.
  • User controls (internal):  MAX set point MIN set point FAIL time increase decrease.
  • Numeric display:  Four digits 0.5”/12mm auto-ranging with backlight.
  • LED indicators:  Sensor above MAX below MIN >100 PPB generator on failure

详细资料